Hamburger Lack-Profi 2K car paint - highly opaque and rust-protecting

Are you looking for a high-quality 2-component car paint?

Then the highly opaque and rust-protecting car paint from the Hamburg paint professional is exactly the right 2K paint.

You will be sent two cans of paint and have to mix them in a 5:1 ratio. (Mixing ratio: 5:1 (component A: component B)). Apply it very thinly and you will get a perfect result. This saves you time, paint and ensures quick drying.

quick-drying - flood-resistant - abrasion-resistant - scratch- and impact-resistant - It is easy to apply with a brush, roller or spray gun.

Processing temperature: from 10°C - Mixing ratio: 5:1 (component A: Component B) - Processing time: approx. 4-5 hours at 20°C - Can be painted over: after 4-6 hours - Can be filled: after 48 hours - Dust dry: after approx. 60 minutes - final hardness: approx. 5-7 days

• Consumption: approx. 10 m² / liter
• Mixing ratio: 5:1 (component A: component B)

To the RAL COLOR overview

If you want to thin the paint, you can >>>CLICK HERE <<< to order our special thinner 2K/400 from Farbenlöwe.

Please note:

The application of 2K or 2-component paint is explained very quickly and easily.

The name itself suggests that the finished paint consists of 2 different components. It is a so-called base varnish (varnish, paint, primer) and the matching hardener. There are a few things to consider to ensure problem-free processing of a 2-component paint. The most important data about the paint is always included in the description of the paint. These are the following points:

• Which hardener belongs to the paint
• Mixing ratio
• Processing viscosity
• Dilution
• Pot life
• Processing time
• Processing type (application)
• Processing conditions

These points in detail:

• Which hardener belongs to the paint?

In the description of the paint (usually even on the paint can) the exact name of the hardener that matches the paint is always given. Please never use another hardener.

• Mixing ratio

The two components, i.e. paint and hardener, are mixed together in a certain ratio immediately before processing. For our paints the ratio is 5:1 (by volume/liters). This means that 5 parts varnish and 1 part hardener are measured and mixed using a measuring cup. Only as much paint should be mixed as is necessary for the work process. Once the hardener has been added, the hardening process can no longer be reversed. Stir the mixture well for at least 1 minute.

• Processing viscosity

Viscosity is a measure of the viscosity of the liquid. The higher the viscosity, the thicker (less flowable) the liquid is, the lower the viscosity, the thinner (more flowable) it is. Depending on the type of paint and type of processing (brushing, spraying, rolling, pouring, dipping), it may be necessary to change the viscosity, i.e. to add some thinner. As a rule, the addition of thinner is between 1% and 20%.

• Dilution

Just like with hardener, it is important to use the correct dilution. This is also stated in the description of the paint and usually on the paint can.

• Pot life

Pot life is the length of time that reactive materials can be processed, e.g.b Varnishes It is the time between mixing a multi-component substance and the end of its processability, so to speak the period of time in which the substance can still be "taken out of the pot" and processed. The end of the pot life is usually indicated by a significant increase in viscosity, which prevents further processing.

• Processing conditions

The processing and especially the drying of 2-component paints should not take place below 10°C. This information refers to the paint material, substrate and room temperature during processing and the subsequent drying and curing time of approx. 5-7 days Temperatures that are too low lead to drying and hardening problems because the necessary chemical reaction cannot take place. Even a short-term cooler temperature during curing can lead to problems.

The information provided is of an advisory nature; it is based on the best knowledge and careful investigations according to the current state of the art. Legal binding cannot be derived from this information. Therefore, please always pay attention to the technical data sheets and contact us if you have any questions about processing. (As of 02/2020)