Mengenrechner
m²
Messen Sie als erstes die gewünschte Fläche aus. Um die Quadratmeter eines Raumes zu berechnen, messen Sie die Länge und anschließend die Breite. Ist der Raum 4,5 Meter breit und 10 Meter lang, müssen Sie die beiden Zahlen nur noch miteinander multiplizieren. Es ergeben sich 4,5 x 10 = 45 Quadratmeter.
Sie benötigen 0 Liter
The high-quality 2-component bathtub paint from FARBENLÖWE is a cost-effective renovation of all bathrooms, shower trays, washbasins and toilets = cheaper than buying a new bathtub! The 2K bathtub coating is also suitable for a plastic tub or plastic tub.
Be a bathtub doctor with high quality thanks to the best raw materials - already in use for many years.
7-9qm/L - Extremely resistant - Abrasion-resistant and extremely hard as a result - Bathtub coating without removal, without dirt, without noise - Fills well and runs - Fast drying and high stability - Easy to apply with a brush, roller or spray gun
Processing temperature: at least 10°C - Mixing ratio: 5:1 (A : B) - Processing time: approx. 60 min at 20°C - Can be painted over: after 12 hours - Can be filled: after 48 hours - Dust dry: after approx. 60 minutes - final hardness: approx. 7 days
1. The bathtub must be clean and free of grease and lime | 2. It is best to remove silicone joints at the edge. After painting, new and clean silicone can be injected | 3. Mask fittings and edges | 4. Roughen the surface and paint twice.
Be a bathtub doctor with high quality thanks to the best raw materials - already in use for many years.
7-9qm/L - Extremely resistant - Abrasion-resistant and extremely hard as a result - Bathtub coating without removal, without dirt, without noise - Fills well and runs - Fast drying and high stability - Easy to apply with a brush, roller or spray gun
Processing temperature: at least 10°C - Mixing ratio: 5:1 (A : B) - Processing time: approx. 60 min at 20°C - Can be painted over: after 12 hours - Can be filled: after 48 hours - Dust dry: after approx. 60 minutes - final hardness: approx. 7 days
1. The bathtub must be clean and free of grease and lime | 2. It is best to remove silicone joints at the edge. After painting, new and clean silicone can be injected | 3. Mask fittings and edges | 4. Roughen the surface and paint twice.
- Consumption: approx. 7-9qm/l
- Drying: dust-dry at 20°C after approx. 1 hour, dry after approx. 3-4 hours, depending on the substrate
- Can be painted over: after approx. 4 hours
- Finest brand quality Made in Germany
- Scandinavian long-term protection
If you want to dilute the paint, you can >>>CLICK HERE <<< to order our special dilution 2K/400 from FARBENLÖWE. If you need paint set,you can>>>CLICK HERE<<< to orderourcolors lion paint set ( X300) to order. This was specially developed for the paints and varnishes of Farben Löwe.
Hardener is supplied and included in the price!
Hilfe 🖐