Goldmeister Farben 2K Klarlack - Hochdeckend - FARBENLÖWE
Goldmeister Farben 2K Klarlack - Hochdeckend - FARBENLÖWE
FARBENLÖWE Goldmeister Farben 2K Klarlack - Hochdeckend
Goldmeister Farben 2K Klarlack - Hochdeckend - FARBENLÖWE
Goldmeister Farben 2K Klarlack - Hochdeckend - FARBENLÖWE

Goldmeister Colors 2K clear coat - highly opaque

salesperson
FARBENLÖWE
Normal price
$36.00
($36.00 | pro 1 liter)
Special Price
$36.00
VAT included.

• Versandzeit ca. 5-7 Werktage

• Kostenloser Versand!

Sichere Transaktion

Rückgaberichtlinien:


Mengenrechner

Wie groß ist die zu bestreichende Fläche?
Messen Sie als erstes die gewünschte Fläche aus. Um die Quadratmeter eines Raumes zu berechnen, messen Sie die Länge und anschließend die Breite. Ist der Raum 4,5 Meter breit und 10 Meter lang, müssen Sie die beiden Zahlen nur noch miteinander multiplizieren. Es ergeben sich 4,5 x 10 = 45 Quadratmeter.

Sie benötigen 0 Liter

The high-quality 2K clear coat from Goldmeister Farben is ideal if you want to paint your car with a new, high-quality paint.

You will be sent two paint cans and have to mix them in a 5:1 ratio. (Mixing ratio: 5:1 (component A : component B))

MADE IN GERMANY - extremely resistant - highly opaque - consumption: approx. 6-8 m² / liter - glossy

High toughness, Abrasion resistance, low water swellability and high chemical resistance.
If you want to dilute the colour, you can >>>CLICK HERE <<< to order our special 2K/400 dilution from colors lion.

If you need paint kit,you can>>>CLICK HERE<<< to orderourcolors lion paint kit ( X300) to order. This was specially developed for the paints and varnishes of Farben Löwe.

Hardener is supplied and included in the price!
Please note:

The application of 2K or 2-component paint is explained very simply and quickly.

The name itself says that the finished paint consists of 2 different components. It is a so-called master paint (varnish, paint, primer) and the matching hardener. There are a few things to consider for problem-free processing of a 2-component paint. The description of the paint always contains the most important data about the paint. These are the following points:

  • Which hardener goes with the paint
  • Mixing ratio
  • Processing viscosity
  • dilution
  • Pot life
  • Processing time
  • Processing type (application)
  • Processing conditions

These points in detail:

  • Which hardener goes with the paint?

The description of the paint (usually even on the paint can) always contains the exact name of the hardener that goes with the paint. Please never use any other hardener.

  • Mixing ratio

The two components, i.e. paint and hardener, are mixed together in a specific ratio directly before processing. With our paints, the ratio is 5:1 (by volume/litres). This means that 5 parts of paint and 1 part of hardener are measured and mixed in a measuring cup. Only as much paint should be mixed as is necessary for the work step. Once the hardener has been added, the hardening process can no longer be reversed. Stir the mixture well for at least 1 minute.

  • Processing viscosity

Viscosity is a measure of the viscosity. The higher the viscosity, the thicker (less flowable) the liquid is, the lower the viscosity, the thinner (more flowable) it is. Depending on the type of paint and processing (painting, spraying, rolling, pouring, dipping) it may be necessary to change the viscosity, i.e. to add a little thinner. Typically, the addition of dilution is between 1% and 20%.

  • dilution

Just like with the hardener, it is important to use the right thinner. This is also given in the description of the paint and usually on the paint can.

  • Pot life

Pot life is the length of time that reactive materials, e.g. paints, can be processed.It is therefore the time between the mixing of a multi-component substance and the end of its processability, the period of time, so to speak, in which the substance can still be "taken out of the pot" and processed Processing prevented.

  • Processing time

Some materials have a processing time in addition to the pot life. Optimum processing is only possible during this time. After that, the workability and the painting result deteriorate, even if the paint is still liquid and no change can be seen. So please only mix as much paint as you can use in one go.

  • Processing type, application

Lacquers and paints are always developed for specific applications. That is why there are differences in the way of processing. For example, spray paint can usually not be applied with a brush, or only very poorly, because it dries far too quickly. With a paint that is suitable for painting, the drying time is much longer, which is why, for example, dust can fall onto the fresh surface longer during the drying time. It is therefore important to pay attention to the type of processing specified for a paint, varnish or primer.

  • Processing conditions

The processing and especially the drying of 2-component paints should not take place below 18°C. This information refers to the paint material, substrate and room temperature during processing and the subsequent drying and curing time of 7 days. Temperatures that are too low lead to drying and hardening problems, as the necessary chemical reaction cannot take place. A brief cooler temperature during curing can also lead to problems.

This information is of an advisory nature, it is based on the best of our knowledge and careful investigations according to the current state of the art. No legal liability can be derived from this information. Therefore, please always refer to the technical data sheets and contact us if you have any questions about processing. (Status 02/2020)

Show warnings
.