The correct use: anti-rust paint

If you have ordered our anti-rust paint, you can find out on this page how to use the paint correctly and what to watch out for when using it.

You will need:

- anti-rust paint
- possibly masking tape to mask off the area not to be coated
- paint roller, brush or cup gun
- if necessary, a thinner (this can also be used afterwards for cleaning the device be used)

Preparation and processing

  1. The processing and especially the drying of the anti-rust paint should not take place below 10°C. This information relates to the paint material, substrate and room temperature during processing and the subsequent drying and curing time.
  2. Dust sources should be removed.
  3. Use painter's tape to mask off the areas that are not to be coated. Stir the paint well before use.
  4. The surface must be sanded before use and be clean, dry and free of grease, silicone and wax. You should definitely remove and grind out loose old paintwork or rust beforehand.
Important: Do not use soapy cleaners or scouring milk. These are made from fatty acids and are therefore not suitable for dissolving fat.
  1. A primer is not necessary.
  2. If desired, thin the anti-rust paint with about 5 - 10% thinner.
  3. Spray, roll or brush paint. 1-2 coats are recommended.
  4. The paint is dust-dry after 24 hours. The product can then also be painted over.

Ready for your project? Whether light gray or reddish brown; we offer you a large selection of high-quality anti-rust primers.

Now to choose from!