The correct use: colored paint

If you have ordered our colored varnish, you can find out how to use the varnish correctly on this page.

You need:

- Colored paint
- Possibly masking tape to mask off the area not to be coated
- Paint roller, brush or airless spray gun
- Thinner if necessary (this can also be used afterwards to clean the device.)

    Preparations and processing:

    1. The processing and especially the drying of the colored paint should not take place below 10°C. This information refers to the paint material, substrate and room temperature during processing and the subsequent drying and curing time.
    2. Dust sources should be removed.
    3. Use painter's tape to mask off the areas that are not to be coated. Stir the paint well before use.
    4. The surface must be sanded before use and be clean, dry and free of grease, silicone and wax. You should definitely remove loose old paintwork or rust beforehand. Important: Do not use soapy cleaners or scouring milk. (These are made from fatty acids and are therefore not suitable for dissolving fat.)
    5. A primer is not necessary. You can also use the colored paint as a primer.
    6. If desired, dilute the metal protective paint with approx. 5 - 10% thinner.
    7. Spray, roll or brush paint. 1-2 coats are recommended.
    8. The paint is dust-dry after 24 hours. The product can then also be painted over.

    Ready for your project? Whether matt, satin or glossy, colorless or in over 200 different RAL colors; we offer you a large selection of high-quality colored paints.

    Now to choose from!