FARBENLÖWE 2K primer - Abrasion-resistant and extremely hard as a result
Tax included. Shipping calculated at checkout
Sichere Transaktion
Order now and receive your goods within 2-3 days for free!
Rückgaberichtlinien:
Mengenrechner
Sie benötigen 0 Liter
The state-of-the-art 2-component primer from FARBENLÖWE is a high-quality coating.
MATT - 7-9qm/kg - Extremely resistant - Abrasion-resistant and rock-hard as a result - Renovation without removal, without dirt, without noise - Fills well and runs - Fast drying and high stability - Easy to apply with a brush, roller or spray gun
MADE IN GERMANY - simple processing - high stability - fast drying
Will be delivered in a SET (hardener & base paint) - mixing ratio 5 : 1 (component A : component B)
- Consumption: approx. 6-8 m² / liter
- Mixing ratio: 10:1 (component A : component B)
- Gloss: MATT
If you want to dilute the paint, you can >>>CLICK HERE <<< to order our special 2K/400 thinner from Farben Löwe.
If you need a paint set, you can >>>CLICK HERE<<< to order our paint lion paint set (X300) with it. This was specially developed for the paints and varnishes of Farben Löwe.
The application of 2K or 2-component paint is explained very simply and quickly.
The name alone says that the finished paint consists of 2 different components. It is a so-called master paint (varnish, paint, primer) and the matching hardener. There are a few things to consider for problem-free processing of a 2-component paint. The description of the paint always contains the most important data about the paint. These are the following points:
- Which hardener goes with the paint
- Mixing ratio
- Processing viscosity
- dilution
- Pot life
- Processing time
- Type of processing (application)
- Processing conditions
These points in detail:
- Which hardener goes with the paint?
In the description of the paint (usually even on the paint can), the exact name of the hardener that goes with the paint is always given. Please never use any other hardener.
- Mixing ratio
The two components, i.e. paint and hardener, are mixed together in a specific ratio directly before processing. With our paints, the ratio is 5:1 (by volume/litres). This means that 5 parts of paint and 1 part of hardener are measured and mixed in a measuring cup. Only as much paint should be mixed as is necessary for the work step. Once the hardener has been added, the hardening process can no longer be reversed. Stir the mixture well for at least 1 minute.
- Processing viscosity
Viscosity is a measure of the viscosity. The higher the viscosity, the thicker (less flowable) the liquid is, the lower the viscosity, the thinner (more flowable) it is. Depending on the type of paint and processing (painting, spraying, rolling, pouring, dipping) it may be necessary to change the viscosity, i.e. to add a little thinner. As a rule, the addition of thinner is between 1% and 20%.
- dilution
Just like with the hardener, it is important to use the right thinner. This is also stated in the description of the paint and usually on the paint can.
- Pot life
The pot life is the duration of the processability of reactive materials, e.g. B paints It is therefore the time between mixing a multi-component substance and the end of its processability, so to speak the period of time in which the substance can still be "taken out of the pot" and processed. The end of the pot life is usually indicated by a significant increase in viscosity, which prevents further processing.
- Processing conditions
The processing and especially the drying of 2-component paints should not take place below 18°C. This information refers to the paint material, substrate and room temperature during processing and the subsequent drying and curing time of 7 days. Temperatures that are too low lead to drying and hardening problems, since the necessary chemical reaction cannot take place. A brief cooler temperature during curing can also lead to problems.
This information is of an advisory nature, it is based on the best of our knowledge and careful investigations according to the current state of the art. No legal liability can be derived from this information. Therefore, please always refer to the technical data sheets and contact us if you have any questions about processing. (Status 02/2020)
Show warnings
Mengenrechner
Sie benötigen 0 Liter
longevity of our products
In this section we show you how our paints look even after 5
years of intensive use - in comparison to other
manufacturers.
colors lion
other producers
FAQ
Do I need a primer?
Our paints are designed in such a way that you basically do not need a primer. However, we recommend making an extra coat and diluting it with our thinner. However, if the substrate is difficult and you want to be on the safe side, we recommend our 2K primer, which is perfectly suited for all substrates. Because a primer ensures a better hold.
Can I also spray paint?
Our paints are ideal for use with spray guns. For best results, we recommend adding 10% thinner to the paint. And the best thing is that you can also use the same thinner to clean the subfloor. This will save you time and effort!
What does an ideal substrate preparation look like?
Thorough surface preparation is essential for optimal painting. The first step is to remove dust and dirt from the surface. It is best to use a broom or water and avoid soap-based cleaners, as these can cause the paintwork to burst later. Instead, we recommend cleaning the surface with our thinner for the best possible result.
How can I contact you?
You can reach us at va@farbenloewe.de or write to us via WhatsApp at +49 40537985761.
This product has no reviews yet.